Requirements and Regulations Regarding Cosmetic Packaging Materials
Release time:
2025-12-11
In fact, all materials used in cosmetic packaging should be non‑toxic and safe. Below, we will explain this from six perspectives. 1. Bottles (including plastic and glass bottles) 1.1 The bottle body should be intact, stable, straight, smooth, and of roughly uniform thickness. It must be free of cold cracks, fissures, obvious scars, or deformations. 1.2 The bottle mouth should be straight and free of burrs. Any mating structures (such as threads) must be in good condition and properly aligned. 1.3 Both the interior and exterior of the bottle must be clean. 1.4 The bottle and cap should fit tightly together, with no slipping, looseness, or leakage. 2. Bags (including paper bags, plastic bags, and composite bags) 2.1 Bags should be free of wrinkles, scratches, and air bubbles, and their color must match the standard sample. 2.2 Seals must be secure and upright, with no openings, holes, or leaks of cream (or liquid). 2.3 Composite bags must have strong lamination and an even coating. 3. Tubes 3.1 The tube body should be smooth, neat, uniformly thick, free of noticeable scratches, and match the color of the standard sample. 3.2 Seals must be tight and not easily opened or folded. 3.3 The cap must meet the required specifications. 4. Boxes (including paper boxes, plastic boxes, and metal boxes) 4.1 Box surfaces should be smooth and well‑shaped, without obvious scratches or burrs. Color must be uniform and consistent with the standard sample. 4.2 Opening and closing mechanisms should function properly and meet testing requirements. 4.3 Mirrors and other items inside the box must be firmly attached to the box, with clear reflections and no scratches or damage. 5. Spray Cans 5.1 Can bodies should be flat, free of rust, with smooth welds, no significant scratches on key areas, and a uniform color matching the standard sample. 5.2 The can rim should be smooth, without cracks or deformations. 5.3 Caps must meet the required specifications. 5.4 Pump‑type spray cans must comply with relevant regulations. 6. Pencil Tubes 6.1 The tube ends should be smooth and evenly finished. 6.2 The tube body must ensure airtight sealing, allowing paste to be smoothly dispensed or pushed out under normal conditions.
In fact, all materials used in cosmetic packaging should be non-toxic and safe. Below, we will explain this from six perspectives.
1. Bottles (including plastic and glass bottles)
1.1 The bottle body is intact, stable, straight, smooth, and of generally uniform thickness. It shows no cold cracks, fissures, obvious scars, or deformations.
1.2 The bottle mouth shall be straight and free of burrs. Matching features (e.g., threads) shall be in good condition and properly aligned.
1.3 Both the inside and outside of the bottle are clean.
1.4 The bottle and cap fit tightly together, with no sliding threads, looseness, or leakage.
2. Bags (including paper bags, plastic bags, and composite bags)
2.1 There shall be no wrinkles, scratches, or bubbles, and the color shall match the standard sample.
2.2 The seal shall be secure and upright, with no openings, holes, or leakage of paste (or liquid).
2.3 The composite bag features secure lamination and uniform coating.
3. Hose
3.1 The pipe body is smooth, neatly finished, with uniform wall thickness, free of obvious scratches, and matches the standard sample in color.
3.2 The seal shall be secure and must not be opened or folded.
3.3 The cover plate shall comply with the requirements.
4. Boxes (including paper boxes, plastic boxes, and metal boxes)
4.1 The surface of the component is smooth and upright, with no visible scratches or burrs. The color is uniform and consistent with the standard sample.
4.2 The looseness is appropriate and meets the test requirements.
4.3 The mirror and the items inside the box are securely glued to the box, with a clear reflection and no scratches or damage.
5. Spray can
5.1 The tank body is flat, free of rust, with smooth welds; major components show no obvious scratches, and the surface color is uniform, consistent with the standard sample.
5.2 The roll mouth shall be smooth, free of cracks and deformations.
5.3 The cover plate shall comply with the requirements.
5.4 Pump-type spray cans shall comply with the relevant requirements.
6. Spindle tube
6.1 The ends of the pipes shall be smooth and uniform.
6.2 The tube body shall be airtight; the paste should be either screwed out or dispensed normally.
Related News
Contact: Ms. Ji
Email: sale1@stjcpack.com
Address: New factory building No.182 Huti Road,Qishan Street,Jingping District,Shantou City,Guangdong Province China 515000
Official account
手机官网